We are using cookies to give you the best, most relevant experience. By continuing to browse this website, you consent to our use of cookies. If you want to know more, please refer to our Cookie Policy.OK
KABUKI Knives|KABUKI Whisky

NEWS

Search by amount

USD  ~  USD

Reset

Shop by Category

 
1 2 3 4 5 6 7 8
  2 - 16
VIEW STYLE:
VIEW:

Kiritsuke Yanagiba VG10 450mm Honyaki Mono Steel Two Side Mirror Finish Ebony handle with Sheath
USD2,344.83
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front and back Mirror finish , approx 438mm, approx 45mm, approx 4.1mm, 353g, Octagonal ebony Nickel ring, 205mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Yoshisada
Sword type Maguro Knife Aogami-1 (BS#1) 530mm Damascus by Yoshisada
USD2,158.62
Unused antique, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Yoshisada of Kyoto blacksmith, Suitable for slicing sashimi by drawing., Kyoto Pref., Taichiro Yamaguchi (Kyoto), Yoshisada Knife, Maguro (Tuna) Knife, Double Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Damascus, approx 518mm, approx 763mm, approx 40mm, approx 6.0mm, According to image, Purple pine, Joined, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.
In stock
+ −

This product is limited to one item and will not be restocked.

Sakimaru Yanagiba VG10
Sakimaru Yanagiba VG10 420mm Honyaki Mono Steel Two side Mirror Finish Ebony handle With Saya
USD2,157.59
Brand New/unused, Image information takes precedence over textual information listed on the product page., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Sakimaru Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front and back Mirror finish , approx 415mm, approx 37.5mm, approx 4.0mm, 326.5g, Octagonal ebony Sterling Silver ring, 205mm, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Sakimaru Yanagiba VG10
Sakimaru Yanagiba VG10 450mm Honyaki Mono Steel Width 45mm One Side Mirror Finish Ebony handle with Sheath
USD2,075.86
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Sakimaru Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 435mm, approx 45mm, approx 4.3mm, 421g, Octagonal ebony Sterling Silver ring, 205mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Sakimaru Yanagiba VG10
Sakimaru Yanagiba VG10 420mm Honyaki Mono Steel Width 45mm One side Mirror Finish Ebony handle With Sheath
USD2,067.24
Brand New/unused, Image information takes precedence over textual information listed on the product page., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Sakimaru Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-66±1, Front Mirror finish (Flat), approx 405mm, approx 45mm, approx 4.2mm, 349g, Octagonal ebony Nickel ring, 205mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Sakimaru Yanagiba VG10 450mm Honyaki Mono Steel Width 37mm One Side Mirror Finish Ebony handle with Sheath
USD1,801.38
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Sakimaru Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 440mm, approx 37mm, approx 3.88mm, 334g, Octagonal ebony Sterling Silver ring, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Kiritsuke Yanagi super width
Kandokoro Kiritsuke VG10 420mm Honyaki Width 50mm Super curve Mono Steel One Side Mirror Evony Handle With Sheath
USD1,779.31
Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 410mm, approx 50mm, approx 4.0mm, 374g, 522g-170mm handle, Octagonal ebony Nickel ring, 170mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock
Add to cart

Yoshisada
Wa-Gyuto Aogami-2 (BS#2) Damascus 360mm Deer Handle by Yoshisada
USD1,772.41
Unused antique, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Yoshisada of Kyoto blacksmith, Professional cooks are also available for general home cooking., Kyoto Pref., Taichiro Yamaguchi (Kyoto), Yoshisada Knife, Wa-Gyuto, Double Edge (Bebvel), Japanese Carbon Steel, Blue #2 Steel and Soft iron, Three-layer Welding (San-Mai constraction), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Damascus, approx 360mm, approx 530mm, approx 54mm, approx 3.5mm, 436g, Deer horn, Joined, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.
In stock
+ −

This product is limited to one item and will not be restocked.

VG10 390mm
Kiritsuke Yanagiba VG10 390mm Honyaki Mono Steel One Side Mirror Ebony Handle Width 52mm Strong curve
USD1,751.72
Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 380mm, approx 52.0mm, approx 3.3mm, Only Blade 317g, Octagonal ebony Nickel ring, 170mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

Out of stock

Kiritsuke Yanagiba VG10 390mm
Kiritsuke Yanagiba VG10 390mm Honyaki Mono Steel Wide Type Full Mirror Ebony Handle with Sheath
USD1,728.28
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, 3 Side Mirror finish , approx 385mm, approx 43.5mm, approx 3.9mm, Octagonal ebony Nickel ring, 165mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock
Add to cart

Yoshisada Knife
Hone Kiri Aogami-2 (BS#2) Damascus 330mm Ebony Handle by Yoshisada　
USD1,724.14
Unused antique, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Yoshisada of Kyoto blacksmith, Kyoto Pref., Taichiro Yamaguchi (Kyoto), Yoshisada Knife, Hamokiri, SIngle Edge (Bebvel), Japanese Carbon Steel, White #2 Steel (edge) and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Damascus, approx 325mm, approx 495mm, approx 55mm, approx 6.3mm, 632g, Ebony , Joined, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

This product is limited to one item and will not be restocked.

Out of stock

This product is for left handed.
Left handed Kiritsuke Yanagiba VG10 300mm Honyaki Mono Steel One Side Mirror Ebony Handle With Sheath
USD1,703.45
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 290mm, approx 33mm, approx 3.9mm, 190g, Octagonal ebony Nickel ring, 150mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Left-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock
Add to cart
 
1 2 3 4 5 6 7 8
  2 - 16