We are using cookies to give you the best, most relevant experience. By continuing to browse this website, you consent to our use of cookies. If you want to know more, please refer to our Cookie Policy.OK
KABUKI Knives|KABUKI Whisky

NEWS

Search by amount

円  ~  円

Reset

Shop by Category

1 - 13  
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
  15 - 29
VIEW STYLE:
VIEW:

Sujihiki VG10 270mm
Sujihiki VG10 270mm Mono Steel Ultra-thin Ebony Handle
85,500 JP¥
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., A kitchen knife that cuts large blocks of meat along the muscles. The blade width is narrow and thin, so it can be used as a slicer., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Wa-Sujihiki, Double Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Wood grinding finish , approx 260mm, approx 37.8mm, approx 1.3mm Ultra-thin, According to image, Octagonal ebony Sterling Silver ring, Unjoined / If you want to join, please check the joining request (free), Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Handle, Professional use (for top chef ), Display products other than kitchen knives are not included.
In stock
Add to cart

Aideba Gin3 210mm
Aideba Gin3 210mm Duble Welding Kasumi Finish with Sheath
85,560 JP¥
Brand New/unused, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Suitable for slicing fish into two or three pieces., Sakai / Osaka Pref./ Japan, Kenji Togashi (Traditional Craftman), Kasahara Hamono-Sakai Osaka, Aideba, SIngle Edge (Bebvel), Stainless Steel, Gin#3 (Yasuki), Other, Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Kasumi finish, approx 210mm, approx 50mm, approx 5.7mm, 280g, Octagonal Magnolia, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, The Deba knife can also cut the head and bones of fish, but if used roughly, the blade may be chipped., Since this knife is made from stainless,it will not rusty., Professional use (for top chef )
In stock
Add to cart

Yanagiba Petty VG10 150mm Honyaki Mono Steel Mirror Finish Ebony Handle
85,586 JP¥
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, A traditional craftsman but undisclosed, Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-60, 3 Side Mirror finish , approx 152mm, approx 290mm, approx 26.5mm, approx 2.8mm, According to image, 3.90oz, Octagonal ebony, Unjoined / If you want to join, please check the joining request (free), Unequipped, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Display products other than kitchen knives are not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Wa-Sujihiki VG10
Wa-Sujihiki VG10 210mm Double Edge Mono Steel Full Mirror Ebony Handle
87,200 JP¥
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Cooking in general, Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Wa-Sujihiki, Double Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front and back Mirror finish , 約 203mm, 約 30mm, 約：1.5mm, According to image, Octagonal ebony Nickel ring, 130mm, Unjoined / If you want to join, please check the joining request (free), Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Handle, Professional use (for top chef ), Display products other than kitchen knives are not included.
In stock
Add to cart

Yanagiba VG10 180mm Honyaki Mono Steel Mirror Finish Ebony Handle With Sheath
89,475 JP¥
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Cooking in general, Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba, SIngle Edge (Bebvel), VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 173mm, approx 27.7mm, approx 2.75mm, Octagonal ebony Nickel ring, 120mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef )
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Kamagara 240mm
Kamagata Shirogami-3 (WS#3) 240mm Double Welding One Side Mirror Kasumki Finish with sheath
90,500 JP¥
Brand New/unused, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., It is suitable for cooking vegetables like Usuba, but the thickness of the ridges is several steps thinner and it is suitable for more delicate peeling., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Kamagata Usuba (West Tyepe), SIngle Edge (Bebvel), Japanese Carbon Steel, White #3 Steel (edge) and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Front Mirror finish (Flat), approx 225mm, approx 55mm, approx 4.8mm, 328.5g, Octagonal Magnolia, Handle will be attached and shipped., Equipped Magnolia White Saya, Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or colectors

In stock
+ −

This product is limited to one item and will not be restocked.

【New Model】Wa-Gyuto VG10 180mm Honyaki Mono Steel Double Edge Full Mirror Finish Ebony Handle
91,000 JP¥
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Professional cooks are also available for general home cooking., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Wa-Gyuto, Double Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front and back Mirror finish , approx 180mm, approx 330mm, approx 42.6mm, approx 3.2mm, According to image, Octagonal ebony Nickel ring, Handle will be attached and shipped., Equipped Magnolia White Saya, Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Aideba Gin3
Aideba Gin3 180mm Duble Welding One Side Mirror with Sheath
92,000 JP¥
Brand New/unused, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Suitable for slicing fish into two or three pieces., Sakai / Osaka Pref./ Japan, Shougo Yamatsuka (Traditional Craftman), Shigehiro Kasahara (Traditional Craftman), Aideba, SIngle Edge (Bebvel), Stainless Steel, Gin#3 (Yasuki), Other, Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Front Mirror finish (Flat), approx 185mm, approx47 mm, approx 5.6mm, 253g, Octagonal Magnolia, approx 133mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, The Deba knife can also cut the head and bones of fish, but if used roughly, the blade may be chipped., Since this knife is made from stainless,it will not rusty., Professional use (for top chef )
In stock
+ −

Yanagiba Shirogami-1
Yanagiba Shirogami-1 (WS#1) 330mm Dobule Welding Kasumi Finish with Ebony Handle
93,200 JP¥
Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Satoshi Nakagawa (Traditional Craftman), Kasahara Hamono-Sakai Osaka, Yanagiba, SIngle Edge (Bebvel), Japanese Carbon Steel, White #1 Steel (edge) and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Unmeasured, Kasumi finish, approx 320mm, approx 490mm, approx 36mm, approx 4.6mm, According to image, Octagonal ebony Nickel ring, 155mm, Handle will be attached and shipped., Saya (Sheath) can be option purchased., Knife holder is not included., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef )

Recommended for Either a Junior Chef or Head Chef; good sharpening skill is recommended.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Yanagiba Shirogami-1 (WS#1) 330mm
Yanagiba Shirogami-1 (WS#1) 330mm Dobule Welding Kasumi Finish with Ebony Handle
93,200 JP¥
Brand New/unused, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Satoshi Nakagawa (Traditional Craftman), Kasahara Hamono-Sakai Osaka, Yanagiba, SIngle Edge (Bebvel), Japanese Carbon Steel, White #1 Steel (edge) and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Unmeasured, Kasumi finish, approx 322mm, approx 490mm, approx 38mm, approx 4.5mm, According to image, Octagonal ebony Nickel ring, 153mm, Saya (Sheath) can be option purchased., Knife holder is not included., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef )

Recommended for Either a Junior Chef or Head Chef; good sharpening skill is recommended.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Kiritsuke Yanagiba Aogami-1 (BS#1) 300mm Dobule Welding One side mirror Kashumi Finish Ebony Handle with Sheath By Satoshi Nakagawa
93,400 JP¥
Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Satoshi Nakagawa (Traditional Craftman), Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Unmeasured, Kasumi finish, approx 270mm, approx 35mm, approx 3.7mm, According to image, 170g, Octagonal ebony Nickel ring, 155mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Knife holder is not included., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade.

Recommended for Either a Junior Chef or Head Chef; good sharpening skill is recommended.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Yanagiba VG10 210mm Honyaki Mono Steel One Side Mirror Finish Ebony Handle With Sheath
93,645 JP¥
Brand New/unused, Image information takes precedence over textual information listed on the product page., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, A traditional craftsman but undisclosed, Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-60, Front Mirror finish (Flat), approx 202mm, approx 312mm, approx 27.6mm, approx 3.25mm, According to image, Octagonal ebony, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef )
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart
1 - 13  
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
  15 - 29