We are using cookies to give you the best, most relevant experience. By continuing to browse this website, you consent to our use of cookies. If you want to know more, please refer to our Cookie Policy.OK
KABUKI Knives|KABUKI Whisky

NEWS

Search by amount

USD  ~  USD

Reset

Shop by Category

 
1 2 3 4 5 6 7 8 9 10 11 12 13
  7 - 21
VIEW STYLE:
VIEW:

Honekiri knife
Hamokiri Silver 3(Ginsan) 300mm Honyaki Mono Steel One Side Mirror Ebony Handle With Saya
USD2,093.10
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shougo Yamatsuka (Traditional Craftman), Nori Igarashi (Yamawaki Knife), Hamokiri, SIngle Edge (Bebvel), Stainless Steel, Gin#3 (Yasuki), Honyaki (Mono Stailess）, Free forging, High vacuum heat Treatment, HRC-62±1, Front Mirror finish (Flat), approx 290mm, approx 55mm, approx 4.4mm, 473g include 160mm ebony handle, Octagonal ebony Nickel ring, 160mm, Joined, Equipped Magnolia White Saya, Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock
+ −

Hamokiri VG10 300mm
Hamokiri VG10 300mm Mono Steel Without Mirror Ebony handle with Sheath
USD1,826.21
Brand New/unused, Rust prevention is unnecessary knife., Suitable for cutting small bones of hamo., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Hamokiri, SIngle Edge (Bebvel), Stainless Steel, VG10 , Cutting forging, Vacuum quenching and Sub-Zero Treating, Wood grinding finish , approx 285mm, approx 58mm, approx 5.0mm, 533g include handle, Octagonal ebony Sterling Silver ring, approx 160mm, Joined, Equipped Magnolia White Saya, Right-handed, The Deba knife can also cut the head and bones of fish, but if used roughly, the blade may be chipped., this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef )
In stock
Add to cart

Hamokiri VG10 330mm
Hamokiri VG10 330mm Mono Steel Without Mirror Ebony handle with Sheath
USD2,000.00
Brand New/unused, Rust prevention is unnecessary knife., Suitable for cutting small bones of hamo., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Hamokiri, SIngle Edge (Bebvel), Stainless Steel, VG10 , Cutting forging, Vacuum quenching and Sub-Zero Treating, Wood grinding finish , approx 285mm, approx 59mm, approx 5.0mm, 583g include handle, Octagonal ebony Sterling Silver ring, approx 160mm, Joined, Equipped Magnolia White Saya, Right-handed, The Deba knife can also cut the head and bones of fish, but if used roughly, the blade may be chipped., this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef )
In stock
Add to cart

Yoshisada Knife
Hone Kiri Aogami-2 (BS#2) Damascus 330mm Ebony Handle by Yoshisada　
USD1,724.14
Unused antique, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Yoshisada of Kyoto blacksmith, Kyoto Pref., Taichiro Yamaguchi (Kyoto), Yoshisada Knife, Hamokiri, SIngle Edge (Bebvel), Japanese Carbon Steel, White #2 Steel (edge) and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Damascus, approx 325mm, approx 495mm, approx 55mm, approx 6.3mm, 632g, Ebony , Joined, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

This product is limited to one item and will not be restocked.

Out of stock

Kyoto Yoshisada
Hone(Hamo) Kiri Aogami-2 (BS#2) Damascus 300mm Ebony Handle by Yoshisada
USD1,282.76
Unused antique, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Yoshisada of Kyoto blacksmith, Kyoto Pref., Taichiro Yamaguchi (Kyoto), Yoshisada Knife, Hamokiri, SIngle Edge (Bebvel), Japanese Carbon Steel, White #2 Steel (edge) and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Damascus, approx 285mm, approx 455mm, approx 53mm, approx 5.8mm, 440g, Ebony , Joined, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

This product is limited to one item and will not be restocked.

Out of stock

Honesuki VG10 150mm Honyaki Mono Steel Three side mirror with Ebony Handle and Sheath
USD785.79
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., A special knife used to separate meat from bones, it is called a boning knife overseas. Honesuki and Garasuki are different names for different lengths., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Hone Suki (East Type) , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-60, 3 Side Mirror finish , approx 143mm, approx 235mm, approx 37.47mm, approx 3.02mm, According to image, Only Blade 71g, Octagonal ebony, 120mm, Unjoined / If you want to join, please check the joining request (free), Unequipped, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef )
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
+ −

Honesuki VG10 165mm
Honesuki VG10 165mm Honyaki Mono Steel with Ebony Handle
USD703.45
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., A special knife used to separate meat from bones, it is called a boning knife overseas. Honesuki and Garasuki are different names for different lengths., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Hone Suki (East Type) , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-60, Wood grinding finish , approx 155mm, approx 258mm, approx 40mm, approx 3.03mm, Only Blade 81g, Octagonal ebony, 120mm, Unjoined / If you want to join, please check the joining request (free), Unequipped, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef )
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Honesuki VG10
Honesuki VG10 180mm Honyaki Mono Steel with Ebony Handle
USD736.55
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., A special knife used to separate meat from bones, it is called a boning knife overseas. Honesuki and Garasuki are different names for different lengths., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Hone Suki (East Type) , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-60, Wood grinding finish , approx 178mm, approx 282mm, approx 42.61mm, approx 3.36mm, Only Blade 108g, Octagonal ebony, 130mm, Unjoined / If you want to join, please check the joining request (free), Unequipped, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef )
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Imokiri AUS-8 Mono Steel Honyaki 180mm
USD158.62
Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for peeling and cutting vegetables., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Other Type, Double Edge (Bebvel), Stainless Steel, AUS-8A, Honyaki (Mono Stailess）, Unmeasured, Wood grinding finish , approx 170mm, approx 310mm, approx 40mm, approx 1.23mm, Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef )
A traditional kitchen knife used in Japanese cuisine.
In stock
+ −

Kamagata 240mm
Kamagata Shirogami-3 (WS#3) 240mm Double Welding Kasumki Finish with sheath
USD516.41
Brand New/unused, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., It is suitable for cooking vegetables like Usuba, but the thickness of the ridges is several steps thinner and it is suitable for more delicate peeling., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Kamagata Usuba (West Tyepe), SIngle Edge (Bebvel), Japanese Carbon Steel, White #3 Steel (edge) and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Kasumi finish, approx 225mm, approx 55mm, approx 4.7mm, 329g, Octagonal Magnolia, Handle will be attached and shipped., Equipped Magnolia White Saya, Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or colectors

In stock
+ −

This product is limited to one item and will not be restocked.

Kamagara 240mm
Kamagata Shirogami-3 (WS#3) 240mm Double Welding One Side Mirror Kasumki Finish with sheath
USD624.14
Brand New/unused, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., It is suitable for cooking vegetables like Usuba, but the thickness of the ridges is several steps thinner and it is suitable for more delicate peeling., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Kamagata Usuba (West Tyepe), SIngle Edge (Bebvel), Japanese Carbon Steel, White #3 Steel (edge) and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Front Mirror finish (Flat), approx 225mm, approx 55mm, approx 4.8mm, 328.5g, Octagonal Magnolia, Handle will be attached and shipped., Equipped Magnolia White Saya, Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or colectors

In stock
+ −

This product is limited to one item and will not be restocked.

Kamagata
Kamagata Shirogami-3 (WS#3) Oil Quenching 240mm One Side Mirror Namiukashi Hamon Ebony handle with sheath By Yoshikazu Ikeda
USD1,373.52
Brand New/unused, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., It is suitable for cooking vegetables like Usuba, but the thickness of the ridges is several steps thinner and it is suitable for more delicate peeling., Sakai / Osaka Pref./ Japan, Yoshikazu Ikeda (Traditional Craftman), Shigehiro Kasahara (Traditional Craftman), Kamagata Usuba (West Tyepe), SIngle Edge (Bebvel), Japanese Carbon Steel, White #3 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Oil Quenching (Mono Steel), Front Mirror finish (Flat), Wave Floating (Namiukashi), approx 233mm, approx 55mm, approx 4.3mm, Only Blade 283g, Octagonal ebony Nickel ring, Approx 150mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or colectors

Out of stock
 
1 2 3 4 5 6 7 8 9 10 11 12 13
  7 - 21