We are using cookies to give you the best, most relevant experience. By continuing to browse this website, you consent to our use of cookies. If you want to know more, please refer to our Cookie Policy.OK
KABUKI Knives|KABUKI Whisky

NEWS

Search by amount

USD  ~  USD

Reset

Shop by Category

 
1 2 3 4
 
VIEW STYLE:
VIEW:

Sword type Sakimaru Takohiki Aogami-2 (BS#2) 360mm Damascus by Yoshisada
USD1,517.24
Unused antique, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Yoshisada of Kyoto blacksmith, Suitable for slicing sashimi by drawing., Kyoto Pref., Taichiro Yamaguchi (Kyoto), Yoshisada Knife, Sakimaru Takohiki, SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #2 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Damascus, approx 262mm, approx 422mm, approx 54mm, approx 3.9mm, According to image, Purple pine, Joined, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

This product is limited to one item and will not be restocked.

Out of stock

Sakimaru Yanagiba VG10
Sakimaru Yanagiba VG10 450mm Honyaki Mono Steel Width 45mm One Side Mirror Finish Ebony handle with Sheath
USD2,075.86
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Sakimaru Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 435mm, approx 45mm, approx 4.3mm, 421g, Octagonal ebony Sterling Silver ring, 205mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Sakimaru Yanagiba VG10 450mm Honyaki Mono Steel Width 37mm One Side Mirror Finish Ebony handle with Sheath
USD1,801.38
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Sakimaru Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 440mm, approx 37mm, approx 3.88mm, 334g, Octagonal ebony Sterling Silver ring, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Sakimaru Yanagiba VG10
Sakimaru Yanagiba VG10 420mm Honyaki Mono Steel Width 45mm One side Mirror Finish Ebony handle With Sheath
USD2,067.24
Brand New/unused, Image information takes precedence over textual information listed on the product page., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Sakimaru Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-66±1, Front Mirror finish (Flat), approx 405mm, approx 45mm, approx 4.2mm, 349g, Octagonal ebony Nickel ring, 205mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Sakimaru Yanagiba VG10
Sakimaru Yanagiba VG10 420mm Honyaki Mono Steel Two side Mirror Finish Ebony handle With Saya
USD2,157.59
Brand New/unused, Image information takes precedence over textual information listed on the product page., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Sakimaru Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front and back Mirror finish , approx 415mm, approx 37.5mm, approx 4.0mm, 326.5g, Octagonal ebony Sterling Silver ring, 205mm, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Sakimaru Yanagiba VG10 390mm
Sakimaru Yanagiba VG10 390mm Honyaki Mono Steel Full Mirror Evony Handle With Sheath
USD1,496.55
Brand New/unused, Image information takes precedence over textual information listed on the product page., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Sakimaru Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front Mirror finish (Flat), approx 380mm, approx 35mm, approx 4.2mm, Octagonal ebony Nickel ring, approx 165mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

先丸柳刃 V金10号 360mm
Sakimaru Yanagiba VG10 360mm Honyaki Mono Steel Three Side Mirror Funish Evony Handle
USD1,306.55
Brand New/unused, Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Sakimaru Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, 3 Side Mirror finish , approx 349mm, approx 35.0mm, approx 3.1mm, 218g, Octagonal ebony Nickel ring, 155mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
Out of stock

Sakimaru Yanagiba VG10 360mm
Sakimaru Yanagiba VG10 360mm Honyaki Mono Steel One Side Mirror Funish Evony Handle With Sheath
USD1,234.48
Brand New/unused, Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Sakimaru Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 354mm, approx 530mm, approx 34.2mm, approx 3.8mm, According to image, 11.76oz, Octagonal ebony Sterling Silver ring, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Sakimaru Yanagiba VG10 360mm
Sakimaru Yanagiba VG10 360mm Honyaki Mono Steel One Side Mirror Funish Evony Handle
USD1,182.76
Brand New/unused, Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Sakimaru Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 352mm, approx 34mm, approx 3.85mm, 338g Include image handle , Octagonal ebony Nickel ring, 160mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Sakimaru Takohiki VG10
Sakimaru Yanagiba VG10 330mm Honyaki Mono Steel One Side Mirror Funish Ebony Handle
USD1,190.34
Brand New/unused, Image information takes precedence over textual information listed on the product page., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Sakimaru Takohiki, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 325mm, approx 488mm, approx 32.5mm, approx 3.95mm, Only Blade 193g, Octagonal ebony, 147mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef )
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Sakimaru Yanagiba VG10
Sakimaru Yanagiba VG10 330mm Honyaki Mono Steel Full Mirror Funish with Ebony Handle and Sheath
USD1,268.28
Brand New/unused, Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Sakimaru Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, 3 Side Mirror finish , approx 324mm, approx 31.0mm, approx 3.60mm, Only Blade 193g, 185g, Octagonal ebony, 155mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef )
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Save 11% Yasukuni Taira
Sakimaru Yanagiba Shirogami-1 (WS#1) 390mm Mizu Honyaki 3 Side Mirror Namiukashi Hamon by Yasukuni Taira
USD1,627.59 USD1,448.28
Brand New/unused, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Fukuoka Pref., Yasuaki Taira (Fukuoka Pref), Yasuaki Taira (Fukuoka Pref), Sakimaru Takohiki, SIngle Edge (Bebvel), Japanese Carbon Steel, White #1 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Water Quenching (Mono Steel), HRC-61, 3 Side Mirror finish , Wave Floating (Namiukashi), approx 380mm, approx 560mm, approx 40mm, approx 4.6mm, According to image, Octagonal KABUKI special handle, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.
Recommended for Head Chef : should also be proficient at sharpening.
Out of stock
 
1 2 3 4