Knife Type - page 12- Kabukiknives Buy Japanese Knife

Yanagiba Shirogami-3 (WS#3) Honyaki 270mm One Side Mirror Namiukashi Hamon Ebony Handle By Kenichi Shiraki

USD965.52

Brand New/unused, We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kenichi Shiraki (Retirement), Shigehiro Kasahara (Traditional Craftman), Yanagiba, SIngle Edge (Bebvel), Japanese Carbon Steel, White #3 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Oil Quenching (Mono Steel), Unmeasured, Front Mirror finish (Flat), Wave Floating (Namiukashi), approx 258mm, 約 418mm, approx 32.8mm, approx 3.36mm, According to image, Octagonal ebony Sterling Silver ring, Handle will be attached and shipped., Saya (Sheath) can be option purchased., Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Junior Chef or Head Chef; good sharpening skill is recommended.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Kirituke Yanagiba Shirogami-3 (WS#3) Honyaki 300mm One side mirror Ebony Handle By Kenichi Shiraki

USD1,153.79

Brand New/unused, We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kenichi Shiraki (Retirement), Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #3 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Oil Quenching (Mono Steel), Unmeasured, Front Mirror finish (Flat), Wave Floating (Namiukashi), approx 289mm, 約 450mm, approx 35mm, approx 3.9mm, According to image, Octagonal ebony, Handle will be attached and shipped., Saya (Sheath) can be option purchased., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Junior Chef or Head Chef; good sharpening skill is recommended.

This product is limited to one item and will not be restocked.

Out of stock

Kiritsuke Yanagiba VG10 330mm Honyaki Mono Steel One Side Mirror Finish Ebony Handle With Sheath Width 36.8mm

USD1,210.34

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 325mm, approx 36.8mm, approx 3.7mm, Only Blade 223g, Octagonal ebony Sterling Silver ring, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Save 22%

Kiritsuke Yanagiba Aogami-1(BS#1) 330mm Double Welding Kasumi and Mirror Finish Ebony Handle MAHITOTU

USD702.07 USD551.03

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Private, Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, HRC-62±1, Front Mirror finish (Flat), approx 320mm ±2mm, approx 480mm ±2mm, approx 35.4mm ±2mm, approx 3.9mm ±2mm, 13.74oz, Octagonal ebony, Unjoined / If you want to join, please check the joining request (free), Saya (Sheath) can be option purchased., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Save 22%

Kiritsuke Yanagiba Aogami-1(BS#1) 300mm Double Welding Kasumi and Mirror Finish Ebony Handle MAHITOTU

USD613.10 USD475.86

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Private, Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, HRC-62±1, Front Mirror finish (Flat), approx 291mm ±2mm, approx 451mm ±2mm, approx 35.96mm ±2mm, approx 4.0mm ±2mm, 13.74oz, Octagonal ebony, Unjoined / If you want to join, please check the joining request (free), Saya (Sheath) can be option purchased., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

This product is limited to one item and will not be restocked.

Out of stock

Save 21%

Yanagiba Aogami-1(BS#1) 330mm Double Welding Kasumi and Mirror Finish Ebony Handle MAHITOTU

USD591.72 USD464.83

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Private, Private, Yamawaki Cutlery-Sakai Osaka, Yanagiba, SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, HRC-62±1, Front Mirror finish (Flat), approx 320mm ±2mm, approx 480mm ±2mm, approx 35.4mm ±2mm, approx 3.9mm ±2mm, 13.74oz, Octagonal ebony, Unjoined / If you want to join, please check the joining request (free), Saya (Sheath) can be option purchased., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Special Size Mioroshi Semi Stailess 385mm Honyaki Mono Steel Super Full Mirror Finish Ironwood Handle

USD1,420.69

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., It's convenient until you grate the fish and cut it into fillets, but if you want to drop the head or cut the bones of the fish, use a deba knife., Sakai / Osaka Pref./ Japan, Other Type, SIngle Edge (Bebvel), Stainless Steel, Semistainless, Honyaki (Mono Stailess）, HRC-63±1, 3 Side Mirror finish , approx 385mm, approx 587mm, approx 52.4mm, approx 5mm, 13.74oz, Octagonal KABUKI special handle, Unjoined / If you want to join, please check the joining request (free), Unequipped, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Yanagiba Petty VG10 150mm Honyaki Mono Steel Mirror Finish Ebony Handle

USD590.25

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, A traditional craftsman but undisclosed, Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-60, 3 Side Mirror finish , approx 152mm, approx 290mm, approx 26.5mm, approx 2.8mm, According to image, 3.90oz, Octagonal ebony, Unjoined / If you want to join, please check the joining request (free), Unequipped, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Display products other than kitchen knives are not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 270mm Honyaki Mono Steel one Side Mirror Evony Handle With Saya

USD768.97

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, A traditional craftsman but undisclosed, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front Mirror finish (Flat), approx 268mm, approx 395mm, approx 29.8mm, approx 3mm, According to image, Octagonal ebony Sterling Silver ring, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Display products other than kitchen knives are not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Save 7%

Kiritsuke Yanagiba Shirogami-1 (WS#1) 270mm Mizu Honyaki 3 side Mirror Finish By Ikeda Yoshikazu

USD1,310.34 USD1,213.79

Brand New/unused, Image information takes precedence over textual information listed on the product page., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Yoshikazu Ikeda (Traditional Craftman), Nori Igarashi (Yamawaki Knife), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #1 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Water Quenching (Mono Steel), Front Mirror finish (Flat and Kiriba), Mt.Fuji embossing and Full Moon, approx 259mm, approx 425mm, approx 33.77mm, approx 4.35mm, According to image, Octagonal ebony Nickel ring, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Saya(sheath) , Collection item, Knife holder is not included.

Recommended for Either a Head Chef or colectors

This product is limited to one item and will not be restocked.

Out of stock

Yanagiba VG10 300mm Honyaki Mono Steel 1 Side Mirror Finish Ebony Handle With Sheath

USD905.86

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 293mm, approx 34.78m, approx 3.3mm, 267g with handle, Octagonal ebony Nickel ring, 150mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

Out of stock

Sakimaru Takohiki VG10 270mm Honyaki Mono Steel Mirror Finish Ebony Handle With Sheath

USD926.90

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Sakimaru Takohiki, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 265mm, approx 29.3mm, approx 2.6mm, According to image, Octagonal ebony Nickel ring, 135mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef )

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

Out of stock

Sakimaru Takohiki VG10 300mm Honyaki Mono Steel Mirror Finish without slightly curve Evony Handle With Sheath

USD1,058.62

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Sakimaru Takohiki, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 293mm, approx 30mm, approx 3.5mm, 160g, Octagonal ebony Sterling Silver ring, 150mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Sakimaru Yanagiba VG10 360mm Honyaki Mono Steel Three Side Mirror Funish Evony Handle

USD1,306.55

Brand New/unused, Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Sakimaru Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, 3 Side Mirror finish , approx 349mm, approx 35.0mm, approx 3.1mm, 218g, Octagonal ebony Nickel ring, 155mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

Out of stock

Sakimaru Yanagiba VG10 360mm Honyaki Mono Steel One Side Mirror Funish Evony Handle With Sheath

USD1,234.48

Brand New/unused, Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Sakimaru Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 354mm, approx 530mm, approx 34.2mm, approx 3.8mm, According to image, 11.76oz, Octagonal ebony Sterling Silver ring, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Wa-Gyuto VG10 210mm Honyaki Mono Steel Mirror Finish Evony Handle

USD880.69

Brand New/unused, Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, A traditional craftsman but undisclosed, Wa-Gyuto, Double Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front and back Mirror finish , approx 210mm, approx 371mm, approx 46mm, approx 3.1mm, According to image, Octagonal ebony, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Handle, Professional use (for top chef )

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

【New Model】Wa-Gyuto VG10 180mm Honyaki Mono Steel Double Edge Full Mirror Finish Ebony Handle

USD627.59

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Professional cooks are also available for general home cooking., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Wa-Gyuto, Double Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front and back Mirror finish , approx 180mm, approx 330mm, approx 42.6mm, approx 3.2mm, According to image, Octagonal ebony Nickel ring, Handle will be attached and shipped., Equipped Magnolia White Saya, Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Yanagiba VG10 270mm Honyaki Mono Steel Mirror Finish Evony Handle With Sheath

USD847.75

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, A traditional craftsman but undisclosed, Yanagiba, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-60, Front Mirror finish (Flat), approx 260mm, approx 425mm, approx 31mm, approx 3.66mm, According to image, Octagonal ebony, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef )

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Usuba VG10 160mm 17 Layer Damascus Hanmmer Finish Mahogany integrated handle MAHITOTU selection

USD104.14

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., MAHITOTU, Suitable for peeling and cutting vegetables., Sakai / Osaka Pref./ Japan, Usuba (East Type), Double Edge (Bebvel), Stainless Steel, VG10 and Damascus Soft iron, Interrupt Welding (Warikomi constraction), HRC-61, Hamered, approx 160mm, approx 310mm, approx 45mm, approx 2mm, According to image, Mahogany Wood, Saya (Sheath) can be option purchased., Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , For professionals (can be used at home)

In stock

Add to cart

Usuba VG1 Double Steel Interrupt Forging 160mm with Mahogany Handle MAHITROTU Brand

USD84.14

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., MAHITOTU, Suitable for peeling and cutting vegetables., Sakai / Osaka Pref./ Japan, Usuba (East Type), Double Edge (Bebvel), Stainless Steel, VG1 and Soft iron, Interrupt Welding (Warikomi constraction), HRC-60, ==, approx 160mm, approx 290mm, approx 44mm, approx 1.9mm, According to image, Joined, Saya (Sheath) can be option purchased., Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , For professionals (can be used at home)

Household high grade knife

In stock

Add to cart

Gyuto High Carbon Mono Steel (SK-4) 210mm Yoshihiro Integrated Handle

USD75.86

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Goumanosuketoshihiro(Yamawaki Cutley MFG.,LTD), Professional cooks are also available for general home cooking., Sakai / Osaka Pref./ Japan, Wa-Gyuto, Double Edge (Bebvel), High-Carbon Steel (standard SK-4) , approx 210mm, 355mm, Mix Plywood, Saya (Sheath) can be option purchased., Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., For professionals (can be used at home)

Recommended for Junior Chef or Amateurs who love cooking.

In stock

Add to cart

Sabaki High Carbon Mono Steel (SK-4) 150mm Yoshihiro Integrated Handle

USD75.86

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Goumanosuketoshihiro(Yamawaki Cutley MFG.,LTD), A special knife used to separate meat from bones, it is called a boning knife overseas. Honesuki and Garasuki are different names for different lengths., Sakai / Osaka Pref./ Japan, Hone Suki (East Type) , Double Edge (Bebvel), High-Carbon Steel (standard SK-4) , 155mm, 270mm, Mix Plywood, Saya (Sheath) can be option purchased., Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., For professionals (can be used at home)

Recommended for Junior Chef or Amateurs who love cooking.

Out of stock

Sujihiki High Carbon Mono Steel (SK-4) 270mm Yoshihiro Integrated Handle

USD103.45

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Goumanosuketoshihiro(Yamawaki Cutley MFG.,LTD), A kitchen knife that cuts large blocks of meat along the muscles. The blade width is narrow and thin, so it can be used as a slicer., Sakai / Osaka Pref./ Japan, Wa-Sujihiki, Double Edge (Bebvel), High-Carbon Steel (standard SK-4) , 274mm, 401mm, Mix Plywood, Saya (Sheath) can be option purchased., Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., For professionals (can be used at home)

Recommended for Junior Chef or Amateurs who love cooking.

In stock

Add to cart

Sujihiki High Carbon Mono Steel (SK-4) 240mm Yoshihiro Integrated Handle

USD94.48

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Goumanosuketoshihiro(Yamawaki Cutley MFG.,LTD), A kitchen knife that cuts large blocks of meat along the muscles. The blade width is narrow and thin, so it can be used as a slicer., Sakai / Osaka Pref./ Japan, Wa-Sujihiki, Double Edge (Bebvel), High-Carbon Steel (standard SK-4) , 249mm, 370mm, Mix Plywood, Saya (Sheath) can be option purchased., Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., For professionals (can be used at home)

Recommended for Junior Chef or Amateurs who love cooking.

In stock

Add to cart

NEWS

Search by amount

Shop by Category

MY ACCOUNTS

SHOPPING&PAYMENTS

DELIVERY&RETURNS

ABOUT US

CONTACT US

NEWS

Search by amount

Shop by Category

E-mail Newsletter

MY ACCOUNTS

SHOPPING&PAYMENTS

DELIVERY&RETURNS

ABOUT US

CONTACT US