We are using cookies to give you the best, most relevant experience. By continuing to browse this website, you consent to our use of cookies. If you want to know more, please refer to our Cookie Policy.OK
KABUKI Knives|KABUKI Whisky

NEWS

Search by amount

USD  ~  USD

Reset

Shop by Category

 
1 2 3 4 5 6
 
VIEW STYLE:
VIEW:

Kiritsuke Yanagi Gin#3 330mm Double Welding 2 side mirror with Ebony Handle
USD780.69
Brand New/unused, Image information takes precedence over textual information listed on the product page., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shougo Yamatsuka (Traditional Craftman), Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Gin#3 (Yasuki), Other, Free forging, Unmeasured, Front Mirror finish (Flat and Kiriba), approx 320mm, approx 388mm, approx 33mm, approx 4.55mm, According to image, Octagonal ebony Nickel ring, Saya (Sheath) can be option purchased., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.
Recommended for a Head Chef; good sharpening skill is recommended.
In stock

This product is limited to one item and will not be restocked.

Add to cart

Save 22% Kiritsuke Yanagiba Aogami-1(BS#1)
Kiritsuke Yanagiba Aogami-1(BS#1) 300mm Double Welding Kasumi and Mirror Finish Ebony Handle MAHITOTU
USD613.10 USD475.86
Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Private, Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, HRC-62±1, Front Mirror finish (Flat), approx 291mm ±2mm, approx 451mm ±2mm, approx 35.96mm ±2mm, approx 4.0mm ±2mm, 13.74oz, Octagonal ebony, Unjoined / If you want to join, please check the joining request (free), Saya (Sheath) can be option purchased., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock

This product is limited to one item and will not be restocked.

Add to cart

Kiritsuke-Yanagiba White#2
Kiritsuke-Yanagiba Shirogami-2 (WS#2) Dobule Welding 230mm Two Side Mirror Finish
USD965.52
Brand New/unused, We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Unknow (Hand made Factory), Hakuho Minamoto (Traditional Craftman / He passed away), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #2 Steel (edge) and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Unmeasured, Front and back Mirror finish , approx 230mm, approx 360mm, approx 32mm, approx 4.2mm, According to image, Octagonal ebony, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Handle and Saya(sheath) , Collection item

切付柳刃 白二鋼 本霞仕上 8寸 両鏡面仕上 銘切:源白鳳

In stock

This product is limited to one item and will not be restocked.

Add to cart

Yanagiba Aogami-1(BS#1) 300mm
Yanagiba Aogami-1(BS#1) 300mm Double Welding Damascus with Blood Fuller with Sheath
USD875.45
Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Satoshi Nakagawa (Traditional Craftman), Kasahara Hamono-Sakai Osaka, Yanagiba, SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), HRC-61, Damascus, approx 290mm, approx 450mm, approx 35mm, approx 4.3mm, According to image, Octagonal Magnolia, 145mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Save 22%
Kiritsuke Yanagiba Aogami-1(BS#1) 330mm Double Welding Kasumi and Mirror Finish Ebony Handle MAHITOTU
USD702.07 USD551.03
Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Private, Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, HRC-62±1, Front Mirror finish (Flat), approx 320mm ±2mm, approx 480mm ±2mm, approx 35.4mm ±2mm, approx 3.9mm ±2mm, 13.74oz, Octagonal ebony, Unjoined / If you want to join, please check the joining request (free), Saya (Sheath) can be option purchased., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock

This product is limited to one item and will not be restocked.

Add to cart

Kiritsuke Yanagiba Aogami-1(BS#1) 360mm
Kiritsuke Yanagiba Aogami-1(BS#1) 360mm Double Welding Kasumi and Mirror Finish Ebony Handle MAHITOTU
USD551.03
Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Private, Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, HRC-62±1, Front Mirror finish (Flat), approx 350mm ±2mm, approx 508mm ±2mm, approx 35.9mm ±2mm, approx 4.5mm ±2mm, 13.74oz, Octagonal ebony, Unjoined / If you want to join, please check the joining request (free), Saya (Sheath) can be option purchased., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock

This product is limited to one item and will not be restocked.

Add to cart

Kiritsuke Yanagiba VG10 270mm Honyaki
Kiritsuke Yanagiba VG10 270mm Honyaki Mono Steel one Side Mirror Evony Handle With Saya
USD768.97
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, A traditional craftsman but undisclosed, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front Mirror finish (Flat), approx 268mm, approx 395mm, approx 29.8mm, approx 3mm, According to image, Octagonal ebony Sterling Silver ring, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Display products other than kitchen knives are not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock
Add to cart

Kiritsuke Yanagiba VG10 450mm Honyaki Mono Steel Two Side Mirror Finish Ebony handle with Sheath
USD2,344.83
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front and back Mirror finish , approx 438mm, approx 45mm, approx 4.1mm, 353g, Octagonal ebony Nickel ring, 205mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Save 13%
Kiritsuke Yanagiba Shirogami-1 (WS#1) Mizu Honyaki 360mm Mt.Fuji and Moon 2 Side Mirror By Masakuni Genkai
USD2,137.93 USD1,862.07
Brand New/unused, Image information takes precedence over textual information listed on the product page., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Yoneo Muko (Masakuni Genkai ), Nori Igarashi (Yamawaki Knife), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #1 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Water Quenching (Mono Steel), Front and back Mirror finish , Mt.Fuji embossing and Full Moon, approx 318mm, approx 440mm, approx 34mm, approx 3.8mm, According to image, Octagonal ebony Sterling Silver ring, Unjoined / If you want to join, please check the joining request (free), Equipped Ebony Saya, Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Wooden box, Collection item, Knife holder is not included.

This product is limited to one item and will not be restocked.

Out of stock

Kiritsuke Yanagiba Aogami-1(BS#1) 330mm Double Welding Damascus with Blood Fuller with Seath
USD879.31
Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Satoshi Nakagawa (Traditional Craftman), Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Damascus, approx 320mm, approx 490mm, approx 37mm, approx 4.3mm, According to image, Octagonal Magnolia, 150mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart

Kiritsuke Yanagiba VG10
【NEW 】Kiritsuke Yanagiba VG10 300mm Double Edge (Bevel) Honyaki Mono Steel Full Mirror Ebony Handle
USD827.59
Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , Double Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front and back Mirror finish , approx 297mm, approx 459mm, approx 34.8mm, approx 3.08mm, Octagonal ebony Nickel ring, 145mm, Unjoined / If you want to join, please check the joining request (free), Saya (Sheath) can be option purchased., Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock
Add to cart

Kirituke Yanagiba
Kiritsuke Yanagiba Aogami-1(BS#1) 360mm Double Welding Damascus with Sheath
USD1,155.17
Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Satoshi Nakagawa (Traditional Craftman), Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Damascus, approx 350mm, approx 525mm, approx 36mm, approx 5.4mm, According to image, Octagonal Magnolia, 155mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.
Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.
In stock
Add to cart
 
1 2 3 4 5 6