Kiritsuke Yanagiba- Kabukiknives Buy Japanese Knife

Kiritsuke Yanagiba Shirogami-1 (WS#1) Mizu Honyaki 360mm Mt.Fuji and Moon 3 side Mirror By Ikeda Yoshikazu

USD2,988.21

Brand New/unused, Image information takes precedence over textual information listed on the product page., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Yoshikazu Ikeda (Traditional Craftman), Nori Igarashi (Yamawaki Knife), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #1 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Water Quenching (Mono Steel), 3 Side Mirror finish , Mt.Fuji embossing Full and Crescent Moon, approx 290mm, Octagonal KABUKI special handle, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Saya(sheath) , Collection item, Knife holder is not included.

For top chef or collector's knife.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Kiritsuke Yanagi Gin#3 330mm Double Welding Kasumi Finish Ebony Handle With Sheath [CLONE]

USD680.83

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shougo Yamatsuka (Traditional Craftman), Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, Gin3 (Silver3) and stailess, Other, Free forging, Unmeasured, Kasumi finish, approx 285mm, approx 34mm, approx 3.8mm, Octagonal ebony Nickel ring, 155mm, Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for a Head Chef; good sharpening skill is recommended.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Kandokoro Kiritsuke Yanagiba Silver 3(Ginsan) 300mm Honyaki Mono One Side Mirror Ebony Handle With Saya

USD1,364.14

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shougo Yamatsuka (Traditional Craftman), Nori Igarashi (Yamawaki Knife), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, Gin#3 (Yasuki), Honyaki (Mono Stailess）, HRC-62±1, Front Mirror finish (Flat), approx 315mm, approx 36mm, approx 4.0mm, 221g, Octagonal ebony Nickel ring, 155mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

Out of stock

Kiritsuke Yanagiba Aogami-1 (BS#1) 300mm Dobule Welding One side mirror Kashumi Finish Ebony Handle with Sheath By Satoshi Nakagawa

USD644.14

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Satoshi Nakagawa (Traditional Craftman), Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Unmeasured, Kasumi finish, approx 270mm, approx 35mm, approx 3.7mm, According to image, 170g, Octagonal ebony Nickel ring, 155mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Knife holder is not included., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade.

Recommended for Either a Junior Chef or Head Chef; good sharpening skill is recommended.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Kiritsuke Yanagiba VG10 360mm Honyaki Mono Steel One Side Mirror Super Curve One side Mirror Ebony Handle

USD1,473.79

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 353mm, approx 40mm, approx 3.25mm, Octagonal ebony Nickel ring, approx 160mm, Handle will be attached and shipped., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 330mm Honyaki Mono Steel One Side Mirror Ebony Handle With Sheath Width 39.0mm

USD1,294.83

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 322mm, approx 39.0mm, approx 4.4mm, 241g, Octagonal ebony Nickel ring, 155mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagi Gin#3 330mm Double Welding Kasumi Finish Ebony Handle With Sheath

USD787.59

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shougo Yamatsuka (Traditional Craftman), Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, Gin3 (Silver3) and stailess, Other, Free forging, Unmeasured, Kasumi finish, approx 325mm, approx 33mm, approx 3.96mm, 216g, Octagonal ebony Nickel ring, 155mm, Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for a Head Chef; good sharpening skill is recommended.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Kiritsuke Yanagiba VG10 390mm Honyaki Mono Steel Wide Type One side Mirror Ebony Handle With Sheath

USD1,512.41

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 385mm, approx 43.0mm, approx 4.3mm, Octagonal ebony Nickel ring, approx 170mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 300mm Honyaki Mono Steel Strong Curve One Side Mirror Evony Handle With Sheath

USD1,244.83

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 295mm, approx 35.0mm, approx 3.7mm, 185g, Octagonal ebony Nickel ring, 150mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 390mm Honyaki Mono Steel Wide Type Full Mirror Ebony Handle [CLONE]

USD1,620.69

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, 3 Side Mirror finish , approx 380mm, approx 42.0mm, approx 4.15mm, Octagonal ebony Nickel ring, 170mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba Ginsan Double Welding Damascus Ebony Handle with Sheath

USD977.24

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shougo Yamatsuka (Traditional Craftman), Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Gin3 (Silver3), Gin3 (Silver3) and stailess, Other, Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Damascus, approx 323mm, approx 38mm, approx 4.0mm, 221g, 336g, Octagonal ebony Sterling Silver ring, 160mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

Out of stock

Left handed Kiritsuke Yanagiba VG10 300mm Honyaki Mono Steel One Side Mirror Ebony Handle With Sheath

USD1,703.45

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 290mm, approx 33mm, approx 3.9mm, 190g, Octagonal ebony Nickel ring, 150mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Left-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 360mm Honyaki Width 40mm Super curve Mono Steel One Side Mirror Evony Handle With Sheath

USD1,503.45

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 349mm, approx 40mm, approx 3.2mm, 218g, Octagonal ebony Nickel ring, 170mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

Out of stock

Kandokoro Kiritsuke VG10 420mm Honyaki Width 50mm Super curve Mono Steel One Side Mirror Evony Handle With Sheath

USD1,779.31

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 410mm, approx 50mm, approx 4.0mm, 374g, 522g-170mm handle, Octagonal ebony Nickel ring, 170mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba Silver 3(Ginsan) 300mm Honyaki Mono One Side Mirror Ebony Handle With Saya

USD1,210.69

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shougo Yamatsuka (Traditional Craftman), Nori Igarashi (Yamawaki Knife), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, Gin#3 (Yasuki), Honyaki (Mono Stailess）, HRC-62±1, Front Mirror finish (Flat), approx 287mm, approx 34mm, approx 4.0mm, Only Blade 172g, 253g Include handle , Octagonal ebony Nickel ring, 150mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kirituke Yanagiba Shirogami-3 (WS#3) Honyaki 300mm Full mirror Ebony Handle with sheath By Kenichi Shiraki

USD1,432.69

Brand New/unused, We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kenichi Shiraki (Retirement), Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #3 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Oil Quenching (Mono Steel), Unmeasured, 3 Side Mirror finish , Wave Floating (Namiukashi), approx mm, approx mm, approx mm, Octagonal ebony, Handle will be attached and shipped., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Junior Chef or Head Chef; good sharpening skill is recommended.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Kiritsuke Yanagiba VG10 360mm Honyaki Mono Steel One Side Mirror Ebony Handle With SheathWidth 40mm Strong curve

USD1,643.45

Brand New/unused, Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 353mm, approx 40.0mm, approx 4.2mm, 270g, Octagonal ebony Nickel ring, 165mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kandokoro Kiritsuke VG10 360mm Honyaki Mono Steel One Side Mirror Ebony Handle Width 50mm Strong curve with sheath

USD1,586.21

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Kandokoro, SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 350mm, approx 50.0mm, approx 3.2mm, 276g, Approx410g, Octagonal ebony Nickel ring, 170mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 390mm Honyaki Mono Steel One Side Mirror Ebony Handle Width 52mm Strong curve

USD1,751.72

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 380mm, approx 52.0mm, approx 3.3mm, Only Blade 317g, Octagonal ebony Nickel ring, 170mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

Out of stock

Kiritsuke Yanagiba VG10 330mm Honyaki Mono Steel One Side Mirror Finish Ebony Handle With Sheath

USD1,158.62

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx mm, 約 320mm, approx 37mm, approx 4.1mm, Only Blade 232g, Octagonal ebony Sterling Silver ring, 155mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

For Left-handed Kiritsuke Yanagiba Silver 3(Ginsan) 300mm Honyaki Mono One Side Mirror Ebony Handle With Saya

USD1,889.66

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shougo Yamatsuka (Traditional Craftman), Nori Igarashi (Yamawaki Knife), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, Gin#3 (Yasuki), Honyaki (Mono Stailess）, HRC-62±1, Front Mirror finish (Flat), approx 320mm, approx 37mm, approx 4.2mm, Only Blade 230g, Octagonal ebony Nickel ring, 155mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Equipped Certificate, Left-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

Out of stock

For Left-handed Kiritsuke Yanagiba Silver 3(Ginsan) 300mm Honyaki Mono One Side Mirror Ebony Handle With Saya

USD1,551.72

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shougo Yamatsuka (Traditional Craftman), Nori Igarashi (Yamawaki Knife), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, Gin#3 (Yasuki), Honyaki (Mono Stailess）, HRC-62±1, Front Mirror finish (Flat), approx 290mm, approx 35mm, approx 3.95mm, Only Blade 184g, Octagonal ebony Nickel ring, 150mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Equipped Certificate, Left-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 270mm Honyaki Mono Steel Full Mirror Ebony Handle With Sheath

USD989.66

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 265mm, approx 32.0mm, approx 3.5mm, Only Blade 145g, Octagonal ebony Nickel ring, 140mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 300mm Honyaki Mono Steel One Side Mirror Evony Handle With Sheath

USD1,025.86

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 298mm, approx 34mm, approx 3.4mm, Only Blade 193g, Octagonal ebony Nickel ring, 150mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 270mm Honyaki Mono Steel One Side Mirror Without slightly curve Ebony Handle With Sheath

USD906.90

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 260mm, approx 32.5mm, approx 3.5mm, Only Blade 148g, Octagonal ebony Nickel ring, 140mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 270mm Honyaki Mono Steel One Side Mirror With slightly curve Ebony Handle With Sheath

USD941.38

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 265mm, approx 32.5mm, approx 3.4mm, Blade 156g, Octagonal ebony Nickel ring, 140mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 300mm Honyaki Mono Steel One Side Mirror Evony Handle With Sheath

USD1,025.86

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 295mm, approx 34.1mm, approx 3.4mm, Only Blade 196g, Octagonal ebony Nickel ring, 150mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 300mm Honyaki Mono Steel Full Mirror Evony Handle With Sheath

USD1,120.69

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, 3 Side Mirror finish , approx 293mm, approx 33.8mm, approx 3.5mm, According to image, Octagonal ebony Nickel ring, 155mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 390mm Honyaki Mono Steel Wide Type Full Mirror Ebony Handle with Sheath

USD1,728.28

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, 3 Side Mirror finish , approx 385mm, approx 43.5mm, approx 3.9mm, Octagonal ebony Nickel ring, 165mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 390mm Honyaki Mono Steel Wide Type One side Mirror Ebony Handle with Sheath

USD1,393.10

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Wood grinding finish , approx 385mm, approx 43.3mm, approx 4.1mm, According to image, Octagonal ebony Nickel ring, approx 170mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 390mm Honyaki Mono Steel Wide Type One side Mirror Ebony Handle with Seath

USD1,480.00

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat and Kiriba), approx 385mm, approx 43.3mm, approx 4.1mm, According to image, Octagonal ebony Nickel ring, approx 170mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 360mm Wide type Honyaki Mono Steel One Side Mirror Ebony Handle with Sheath

USD1,499.66

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front and back Mirror finish , approx 350mm, approx 40mm, approx 3.26mm, According to image, Octagonal ebony Nickel ring, 160mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

Out of stock

Kiritsuke Yanagiba VG10 360mm Honyaki Mono Steel One Side Mirror Ebony Handle with Sheath Width 40mm Strong curve

USD1,499.66

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 350mm, approx 40.0mm, approx 4.0mm, Only Blade 275g, Octagonal ebony Nickel ring, 160mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 330mm Honyaki Mono Steel Three Side Mirror Ebony Handle With Sheath Width 37mm

USD1,372.41

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, 3 Side Mirror finish , approx 325mm, approx 37mm, approx 4.2mm, Only Blade 214g, Octagonal ebony Nickel ring, 155mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba Shirogami-1 (WS#1) Mizu Honyaki 330mm Namiukashi wave Hamon 3side Mirror By Ikeda Yoshikazu

USD2,586.21

Brand New/unused, Image information takes precedence over textual information listed on the product page., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Yoshikazu Ikeda (Traditional Craftman), Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #1 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Water Quenching (Mono Steel), 3 Side Mirror finish , Wave Floating (Namiukashi), approx 323mm, approx 447mm, approx 36.1mm, approx 4.44mm, According to image, Octagonal ebony Nickel ring, Unjoined / If you want to join, please check the joining request (free), Saya (Sheath) can be option purchased., Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Saya(sheath) , Collection item, Knife holder is not included.

For top chef or collector's knife.

This product is limited to one item and will not be restocked.

Out of stock

Kirituske Ymagiba VG10 330mm Double Edge 3 Layers Welding 2 Side Mirror Funish Ebony Handle By Satoshi Nakagawa

USD786.21

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Satoshi Nakagawa (Traditional Craftman), Private, Yanagiba Kiritsuke , Double Edge (Bebvel), VG10, VG10and Soft stainless, Interrupt Welding (Warikomi constraction), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), HRC-61, Front Mirror finish (Flat), approx 320mm, approx 487mm, approx 37.8mm, approx 2.67mm, According to image, 260g, Octagonal ebony, 155mm, Unjoined / If you want to join, please check the joining request (free), Unequipped, Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kirituske Ymagiba VG10 330mm Double Edge 3 Layers Welding 2 Side Mirror Funish Ebony Handle By Satoshi Nakagawa

USD786.21

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Satoshi Nakagawa (Traditional Craftman), Private, Yanagiba Kiritsuke , Double Edge (Bebvel), VG10, VG10and Soft stainless, Interrupt Welding (Warikomi constraction), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), HRC-61, Front Mirror finish (Flat), approx 322mm, approx 489mm, approx 38mm, approx 2.9mm, According to image, 266g, Octagonal ebony, 155mm, Unjoined / If you want to join, please check the joining request (free), Unequipped, Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kirituske Ymagiba VG10 330mm Double Edge 3 Layers Welding 2 Side Mirror Funish Ebony Handle By Satoshi Nakagawa

USD786.21

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Satoshi Nakagawa (Traditional Craftman), Private, Yanagiba Kiritsuke , Double Edge (Bebvel), VG10, VG10and Soft stainless, Interrupt Welding (Warikomi constraction), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), HRC-61, Front Mirror finish (Flat), approx 322mm, approx 489mm, approx 38.5mm, approx 2.84mm, According to image, 263g, Octagonal ebony, 155mm, Unjoined / If you want to join, please check the joining request (free), Unequipped, Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 270mm Honyaki Mono Steel One Side Mirror With slightly curve Ebony Handle With Sheath

USD941.38

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 262mm, approx 33mm, approx 3.2mm, Only Blade 155g, Octagonal ebony Nickel ring, 140mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 240mm Honyaki Mono Steel One Side Mirror With slightly curve Ebony Handle

USD790.54

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front Mirror finish (Flat), approx 238mm, approx 380mm, approx 29.5mm, approx 3.5mm, Octagonal ebony Nickel ring, 130mm, Unjoined / If you want to join, please check the joining request (free), Unequipped, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

Out of stock

Kiritsuke Yanagiba VG10 210mm Honyaki Mono Steel one Side Mirror Evony Handle

USD675.86

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, A traditional craftsman but undisclosed, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front Mirror finish (Flat), approx 205mm, approx 344mm, approx 29.0mm, approx 2.7mm, According to image, Octagonal ebony Sterling Silver ring, approx 125mm, Unjoined / If you want to join, please check the joining request (free), Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Display products other than kitchen knives are not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

Out of stock

Kiritsuke Yanagiba Double Edge (Bevel) VG10 330mm Honyaki Mono Steel Mirror Finish Ebony handle

USD1,462.07

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Cooking in general, Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , Double Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front and back Mirror finish , approx 327mm, approx 496mm, approx 37.1mm, approx 4.3mm, According to image, Octagonal ebony, 153mm, Unjoined / If you want to join, please check the joining request (free), Unequipped, Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef )

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

Out of stock

Save 11%

Kirituke Yanagiba Shirogami-1 (WS#1) 390mm Mizu Honyaki 3 Side Mirror Mt.Fuji and Moon by Yassuaki Taira

USD1,627.59 USD1,448.28

Brand New/unused, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Fukuoka Pref., Yasuaki Taira (Fukuoka Pref), Yasuaki Taira (Fukuoka Pref), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #1 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Water Quenching (Mono Steel), HRC-61, 3 Side Mirror finish , Mt.Fuji embossing Full and Crescent Moon, approx 380mm, approx 565mm, approx 41mm, approx 4.5mm, According to image, Octagonal KABUKI special handle, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Head Chef : should also be proficient at sharpening.

Out of stock

Kiritsuke Yanagiba Shirogami-3 (WS#3) Oil Quenching 330mm Full Mirror Namiukashi Hamon By Yoshikazu Ikeda

USD1,470.34

Brand New/unused, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Yoshikazu Ikeda (Traditional Craftman), Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #3 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Oil Quenching (Mono Steel), 3 Side Mirror finish , Wave Floating (Namiukashi), approx 324mm, approx 39.0mm, approx 4.5mm, According to image, Octagonal ebony Nickel ring, Approx 153mm, Unjoined / If you want to join, please check the joining request (free), Saya (Sheath) can be option purchased., Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or colectors

This product is limited to one item and will not be restocked.

Out of stock

Kiritsuke Yanagiba Shirogami-3 (WS#3) Oil Quenching 330mm Full Mirror Namiukashi Hamon By Yoshikazu Ikeda

USD1,724.14

Brand New/unused, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Yoshikazu Ikeda (Traditional Craftman), Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #3 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Oil Quenching (Mono Steel), 3 Side Mirror finish , Wave Floating (Namiukashi), approx 324mm, approx 39.0mm, approx 4.5mm, According to image, Octagonal KABUKI special handle, Approx 153mm, Unjoined / If you want to join, please check the joining request (free), Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or colectors

In stock

This product is limited to one item and will not be restocked.

Add to cart

Kiritsuke Yanagiba Shirogami-3 (WS#3) Oil Quenching 330mm Full Mirror Namiukashi Hamon By Yoshikazu Ikeda

USD1,724.14

Brand New/unused, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Yoshikazu Ikeda (Traditional Craftman), Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #3 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Oil Quenching (Mono Steel), 3 Side Mirror finish , Wave Floating (Namiukashi), approx 324mm, approx 39.2mm, approx 4.5mm, According to image, Octagonal ebony Nickel ring, Approx 153mm, Unjoined / If you want to join, please check the joining request (free), Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

For top chef or collector.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Kiritsuke Yanagiba Shirogami-3 (WS#3) Oil Quenching 330mm One side Mirror Namiukashi Hamon By Ikeda Yoshikazu

USD1,393.10

Brand New/unused, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Yoshikazu Ikeda (Traditional Craftman), Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #3 Steel , Honyaki (Mono Carbon Steel）, Free forging, Front Mirror finish (Flat), Wave Floating (Namiukashi), approx 324mm, approx 500mm, approx 39.2mm, approx 4.5mm, According to image, Octagonal ebony Nickel ring, 165mm, Unjoined / If you want to join, please check the joining request (free), Saya (Sheath) can be option purchased., Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or colectors

In stock

This product is limited to one item and will not be restocked.

Add to cart

Kiritsuke Yanagiba Shirogami-3 (WS#3) Oil Quenching 330mm One side Mirror Namiukashi Hamon By Ikeda Yoshikazu

USD1,304.14

Brand New/unused, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Yoshikazu Ikeda (Traditional Craftman), Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #3 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Oil Quenching (Mono Steel), Front Mirror finish (Flat), Wave Floating (Namiukashi), approx 323mm, approx 489mm, approx 39.3mm, approx 4.45mm, According to image, Octagonal ebony Nickel ring, 155mm, Unjoined / If you want to join, please check the joining request (free), Saya (Sheath) can be option purchased., Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or colectors

This product is limited to one item and will not be restocked.

Out of stock

Kiritsuke Yanagiba VG10 330mm Honyaki Mono Steel One Side Mirror Ebony Handle With Sheath Width 35.8mm

USD1,206.90

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 320mm, approx 35.8mm, approx 3.7mm, Only Blade 213g, Octagonal ebony Nickel ring, 155mm, Unjoined / If you want to join, please check the joining request (free), Unequipped, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 360mm Honyaki Mono Steel One Side Mirror Ebony Handle With Sheath

USD1,172.14

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 350mm, approx 38mm, approx 4.21mm, Octagonal ebony Nickel ring, approx 160mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

【NEW 】Kiritsuke Yanagiba VG10 300mm Double Edge (Bevel) Honyaki Mono Steel Full Mirror Ebony Handle

USD827.59

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , Double Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front and back Mirror finish , approx 297mm, approx 459mm, approx 34.8mm, approx 3.08mm, Octagonal ebony Nickel ring, 145mm, Unjoined / If you want to join, please check the joining request (free), Saya (Sheath) can be option purchased., Ambidextrous, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba Aogami-1(BS#1) 360mm Double Welding Kasumi and Mirror Finish Ebony Handle MAHITOTU

USD551.03

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Private, Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, HRC-62±1, Front Mirror finish (Flat), approx 350mm ±2mm, approx 508mm ±2mm, approx 35.9mm ±2mm, approx 4.5mm ±2mm, 13.74oz, Octagonal ebony, Unjoined / If you want to join, please check the joining request (free), Saya (Sheath) can be option purchased., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Kirituke Yanagiba Shirogami-3 (WS#3) Honyaki 300mm One side mirror Ebony Handle By Kenichi Shiraki

USD1,153.79

Brand New/unused, We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kenichi Shiraki (Retirement), Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #3 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Oil Quenching (Mono Steel), Unmeasured, Front Mirror finish (Flat), Wave Floating (Namiukashi), approx 289mm, 約 450mm, approx 35mm, approx 3.9mm, According to image, Octagonal ebony, Handle will be attached and shipped., Saya (Sheath) can be option purchased., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Junior Chef or Head Chef; good sharpening skill is recommended.

This product is limited to one item and will not be restocked.

Out of stock

Kiritsuke Yanagiba VG10 330mm Honyaki Mono Steel One Side Mirror Finish Ebony Handle With Sheath Width 36.8mm

USD1,210.34

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 325mm, approx 36.8mm, approx 3.7mm, Only Blade 223g, Octagonal ebony Sterling Silver ring, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Save 22%

Kiritsuke Yanagiba Aogami-1(BS#1) 330mm Double Welding Kasumi and Mirror Finish Ebony Handle MAHITOTU

USD702.07 USD551.03

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Private, Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, HRC-62±1, Front Mirror finish (Flat), approx 320mm ±2mm, approx 480mm ±2mm, approx 35.4mm ±2mm, approx 3.9mm ±2mm, 13.74oz, Octagonal ebony, Unjoined / If you want to join, please check the joining request (free), Saya (Sheath) can be option purchased., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Save 22%

Kiritsuke Yanagiba Aogami-1(BS#1) 300mm Double Welding Kasumi and Mirror Finish Ebony Handle MAHITOTU

USD613.10 USD475.86

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Private, Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, HRC-62±1, Front Mirror finish (Flat), approx 291mm ±2mm, approx 451mm ±2mm, approx 35.96mm ±2mm, approx 4.0mm ±2mm, 13.74oz, Octagonal ebony, Unjoined / If you want to join, please check the joining request (free), Saya (Sheath) can be option purchased., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Kiritsuke Yanagiba VG10 270mm Honyaki Mono Steel one Side Mirror Evony Handle With Saya

USD768.97

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, A traditional craftsman but undisclosed, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front Mirror finish (Flat), approx 268mm, approx 395mm, approx 29.8mm, approx 3mm, According to image, Octagonal ebony Sterling Silver ring, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Professional use (for top chef ), Display products other than kitchen knives are not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Save 7%

Kiritsuke Yanagiba Shirogami-1 (WS#1) 270mm Mizu Honyaki 3 side Mirror Finish By Ikeda Yoshikazu

USD1,310.34 USD1,213.79

Brand New/unused, Image information takes precedence over textual information listed on the product page., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Yoshikazu Ikeda (Traditional Craftman), Nori Igarashi (Yamawaki Knife), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #1 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Water Quenching (Mono Steel), Front Mirror finish (Flat and Kiriba), Mt.Fuji embossing and Full Moon, approx 259mm, approx 425mm, approx 33.77mm, approx 4.35mm, According to image, Octagonal ebony Nickel ring, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Saya(sheath) , Collection item, Knife holder is not included.

Recommended for Either a Head Chef or colectors

This product is limited to one item and will not be restocked.

Out of stock

Save 4%

Kirituke Yanagiba Shirogami-2(WS#2) Double Welding 270mm Yoshihiro-Kasumi-Nanako Series

USD241.38 USD231.03

Brand New/unused, Image information takes precedence over textual information listed on the product page., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #2 Steel (edge) and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), According to image, Special Paint Round shape Magnolia, Joined, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Saya(sheath) , For professionals (can be used at home)

Recommended for Junior Chef or Amateurs who love cooking.: should also be proficient at sharpening.

In stock

Quantity:

+ −

Kiritsuke Yanagiba Aogami-1(BS#1) 360mm Double Welding Damascus with Sheath

USD1,155.17

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Satoshi Nakagawa (Traditional Craftman), Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Damascus, approx 350mm, approx 525mm, approx 36mm, approx 5.4mm, According to image, Octagonal Magnolia, 155mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba Aogami-1(BS#1) 330mm Double Welding Damascus with Blood Fuller with Seath

USD879.31

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Satoshi Nakagawa (Traditional Craftman), Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Damascus, approx 320mm, approx 490mm, approx 37mm, approx 4.3mm, According to image, Octagonal Magnolia, 150mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Yanagiba Aogami-1(BS#1) 300mm Double Welding Damascus with Blood Fuller with Sheath

USD875.45

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Satoshi Nakagawa (Traditional Craftman), Kasahara Hamono-Sakai Osaka, Yanagiba, SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), HRC-61, Damascus, approx 290mm, approx 450mm, approx 35mm, approx 4.3mm, According to image, Octagonal Magnolia, 145mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 300mm Honyaki Mono Steel One Side Mirror Evony Handle With Sheath

USD1,000.00

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-61, Front Mirror finish (Flat), approx 300mm, approx 34mm, approx 3.6mm, According to image, Octagonal ebony Nickel ring, 150mm, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

Out of stock

Kiritsuke Yanagiba Aogami-1(BS#1) 330mm Double Welding Damascus Ebony handle with Seath

USD1,146.21

Brand New/unused, The image is a representative image of this product. Since they are all 100% handmade, there are subtle differences in the blade pattern and bend etc.of each product. Please check the detailed information for the size of each product., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Satoshi Nakagawa (Traditional Craftman), Yamawaki Cutlery-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #1 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Damascus, approx 320mm, approx 490mm, approx 34mm, approx 4.6mm, According to image, Octagonal ebony Sterling Silver ring, Handle will be attached and shipped., Saya (Sheath) can be option purchased., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Kiritsuke Yanagiba VG10 450mm Honyaki Mono Steel Two Side Mirror Finish Ebony handle with Sheath

USD2,344.83

Brand New/unused, Image information takes precedence over textual information listed on the product page., Rust prevention is unnecessary knife., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shigehiro Kasahara (Traditional Craftman), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Stainless Steel, VG10 , Honyaki (Mono Stailess）, Cutting forging, Electric furnace (pot), HRC-62±1, Front and back Mirror finish , approx 438mm, approx 45mm, approx 4.1mm, 353g, Octagonal ebony Nickel ring, 205mm, Handle will be attached and shipped., Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , Since this knife is made from stainless,it will not rusty., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

Recommended for Either a Head Chef or Junior Chef : should also be proficient at sharpening.

In stock

Add to cart

Save 13%

Kiritsuke Yanagiba Shirogami-1 (WS#1) Mizu Honyaki 360mm Mt.Fuji and Moon 2 Side Mirror By Masakuni Genkai

USD2,137.93 USD1,862.07

Brand New/unused, Image information takes precedence over textual information listed on the product page., The rust-proof liquid is painted., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Yoneo Muko (Masakuni Genkai ), Nori Igarashi (Yamawaki Knife), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #1 Steel , Honyaki (Mono Carbon Steel）, Free forging, Traditional Water Quenching (Mono Steel), Front and back Mirror finish , Mt.Fuji embossing and Full Moon, approx 318mm, approx 440mm, approx 34mm, approx 3.8mm, According to image, Octagonal ebony Sterling Silver ring, Unjoined / If you want to join, please check the joining request (free), Equipped Ebony Saya, Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Wooden box, Collection item, Knife holder is not included.

This product is limited to one item and will not be restocked.

Out of stock

Kiritsuke Yanagi Gin#3 330mm Double Welding 2 side mirror with Ebony Handle

USD780.69

Brand New/unused, Image information takes precedence over textual information listed on the product page., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Shougo Yamatsuka (Traditional Craftman), Kasahara Hamono-Sakai Osaka, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Gin#3 (Yasuki), Other, Free forging, Unmeasured, Front Mirror finish (Flat and Kiriba), approx 320mm, approx 388mm, approx 33mm, approx 4.55mm, According to image, Octagonal ebony Nickel ring, Saya (Sheath) can be option purchased., Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Professional use (for top chef ), Knife holder is not included.

Recommended for a Head Chef; good sharpening skill is recommended.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Kiritsuke Yanagiba Aogami-2 (BS#2) Dobule Welding 300mm Kasumi Finish

USD420.69

Brand New/unused, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Unknow (Hand made Factory), Unknown, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #2 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Unmeasured, Kasumi finish, approx 291mm, approx 455mm, approx 35mm, approx 4mm, According to image, Octagonal Magnolia, Joined, Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

In stock

Add to cart

Kiritsuke Yanagiba Aogami-2 (BS#2) Dobule Welding Kasumi Finish 300mm

USD446.90

Brand New/unused, Image information takes precedence over textual information listed on the product page., We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Unknow (Hand made Factory), Unknown, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, Blue #2 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Unmeasured, Kasumi finish, approx 291mm, approx 455mm, approx 35mm, approx 4mm, According to image, Octagonal Magnolia, Joined, Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Saya(sheath) , Professional use (for top chef ), Knife holder is not included.

切付柳刃青二鋼 1尺本鍛錬本霞仕上

Out of stock

Kiritsuke-Yanagiba Aogami-2 (BS#2) 295mm Damascus Ultra Two Side Mirror Finish

USD496.55

Brand New/unused, We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, A traditional craftsman but undisclosed, Yanagiba Kiritsuke , SIngle Edge (Bebvel), Blue #2 Steel and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), HRC-61, Front and back Mirror finish , approx 295mm, approx 415mm, approx 34ｍｍ, approx 4.3ｍｍ, According to image, Octagonal ebony Nickel ring, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Saya(sheath) , Professional use (for top chef )

Recommended for Either a Junior Chef or Head Chef; good sharpening skill is recommended.

In stock

This product is limited to one item and will not be restocked.

Add to cart

Kiritsuke-Yanagiba Shirogami-2 (WS#2) Dobule Welding 230mm Two Side Mirror Finish

USD965.52

Brand New/unused, We ship with rust-stopping oil., Suitable for slicing sashimi by drawing., Sakai / Osaka Pref./ Japan, Unknow (Hand made Factory), Hakuho Minamoto (Traditional Craftman / He passed away), Yanagiba Kiritsuke , SIngle Edge (Bebvel), Japanese Carbon Steel, White #2 Steel (edge) and Soft iron, Double Welding (Hagane on Soft Iron), Free forging, Traditional Pine Charcoal Quenching (Duble Steel), Unmeasured, Front and back Mirror finish , approx 230mm, approx 360mm, approx 32mm, approx 4.2mm, According to image, Octagonal ebony, Unjoined / If you want to join, please check the joining request (free), Equipped Magnolia White Saya, Equipped Certificate, Right-handed, Since the blade can chip or break, do not attempt to cut, hit or chop frozen products or hard bones. , this is a high carbon steel knife, the knife rusts easily,which requires special care. Apply oil if for long-term storage. Also use a sharpening stone to maintain the sharpness of the blade., Handle and Saya(sheath) , Collection item

切付柳刃白二鋼本霞仕上 8寸両鏡面仕上銘切:源白鳳

In stock

This product is limited to one item and will not be restocked.

Add to cart

NEWS

Search by amount

Shop by Category

MY ACCOUNTS

SHOPPING&PAYMENTS

DELIVERY&RETURNS

ABOUT US

CONTACT US

NEWS

Search by amount

Shop by Category

E-mail Newsletter

MY ACCOUNTS

SHOPPING&PAYMENTS

DELIVERY&RETURNS

ABOUT US

CONTACT US